Circutor REC3 Series Bedienungsanleitung PDF herunterladen (Seite 11)

3�- UNIT INSTALLATION

3.1.- PRIOR RECOMMENDATIONS

In order to use the unit safely, it is critical that those who handle it follow the

safety measures set out in the standards of the country where it is being used,

use the necessary personal protective equipment and pay attention to the vari-

ous warnings indicated in this instruction manual.

The REC 3unitmustbeinstalledbyauthorisedandqualiedstaff.

Also, it is critical to keep the cables in perfect condition in order to avoid accidents, personal

injury and damage to installations.

The manufacturer of the unit is not responsible for any damages resulting from failure by the

user or installer to heed the warnings and/or recommendations set out in this manual, nor

for damages resulting from the use of non-original products or accessories or those made by

other manufacturers.

If you detect any operational faults in the unit or in its protection system, remove the unit from

service.

This unit has been designed for easy replacement in case of malfunction.

Disable the automatic reclosing function and disconnect the main protection

device before handling active parts.

Please contact the after-sales service if you suspect that there is an operational

fault in the unit.

3.2.- INSTALLATION

Do not use the unit until it is fully installed.

The REC 3 isaunitspecicallydesignedtobeinstalledinelectricpanelsorenclosures,with

DINrailxingelements (IEC 60715).

To install the unit on a DIN rail (Figure 5) :

1�- Place the unit at the top of the DIN rail.

2�- Swing the REC 3 downwards until it is secured to the lower section of the DIN rail.

3�- Make sure that it has been secured on the rail.

Instruction Manual

REC 3 - REC 3C

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

Keine Kommentare

Circutor REC3 Series Bedienungsanleitung Seite 11