Circutor GETEST Series Bedienungsanleitung PDF herunterladen (Seite 17)

Instruction manual

Getest

Specifications

Mains supply

Voltage 230V+/-20% 50-60Hz

Current 15A AC

Note: Required low impedance in mains supply line for getting maximum performance, as up to

320A 20ms current surges may appear when requesting maximum currents. Mains supply wire

section recommended 2.5mm

or bigger, in order to have a low line resistance.

Nota2

We recommend to protect the mains power line with a circuit breaker : 50A curve B, or

30A curve C, or 16A curve D, as per EN60898

Current injection

Max output voltage: 600VAC

Max output current: 50 A.

Max power: (30KVA).

Minimum value limits:

max

= √(30000/R

load

) or I

max

= 600/R

load

Voltage meter

Type: true RMS

Input impedance: 10MΩ or 1KΩ, selectable

Resolution:

700VAC scale – 0.5VAC resolution

280VAC scale – 0.1VAC resolution

105VAC scale – 0.1AC resolution

70VAC scale – 0.1VAC resolution

30VAC scale – 0.1VAC resolution

0.8VAC scale – 0.01VAC resolution

Max voltage: 700VAC

Scales: Auto (0.8, 30, 70, 105, 280, 700)

Accuracy : 1% reading + 2 digits

Current meter

Type : true RMS

Input impedance: less than 0.1Ω

Resolution:

100AAC scale – 0.1AAC resolution

10AAC scale – 0.01AAC resolution

Max current: 100AAC

Scales: Auto (10, 100)

Accuracy : 2% reading + 2 digits

Resistance meter

Range : 0 - 150Ω

Accuracy : 2.5% reading + 2 digits

Communications

UART protocol, key protected, over Bluetooth v1.2

Class I

Tx Power: +18dBm

Sensitivity: -88dBm

Regulatory approvals:

FCC Part 15 Subpart C Section 15.247

ETSI EN 300 328

ETSI EN 301 489-1

1 2 ... 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Circutor GETEST Series Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Circutor GETEST Series