Circutor CVM-C10 Series Bedienungsanleitung PDF herunterladen (Seite 37)

If you press the key after changing the last digit, it will jump back to the rst digit so you

can modify the previously programmed values again.

To validate the data, press for 3 seconds and the prog icon will disappear from the display.

If the password is correct, the icon will change its status to not locked .

If you do not enter the password or it is incorrect, you can open the programming menu but it

cannot be modied.

The programming menu is unlocked for a short period of time and it will be locked again when

you exit the unit's menu.

To permanently unlock the unit, select the programming parameter “4.9.29. Locking the

programming”

Press key to access the next programming step.

Default password: 1234.

4�9�1� Primary voltage

On this screen the voltage transformer primary is programmed.

Press key

for 3 seconds to edit the transformer primary

value. The prog icon will be displayed on the bottom of the

screen.

To enter or modify the value, press the

key repeatedly,

increasing the value of the ashing digit.

When the desired value is shown on the screen, move onto the next digit by pressing the key

to modify the other values.

If you press the key after changing the last digit, it will jump back to the rst digit so you

can modify the previously programmed values again.

To validate the data, press for 3 seconds and the prog icon will disappear from the display.

The programmed value will be deleted if the entered value is higher than the maximum

programming value.

Maximum programming value: 599999.

Minimum programming value: 1.

Voltage ratio x Current ratio < 600000

NB: The ratio is the relation between the primary and the secondary.

Press key to access the next programming step.

Instruction Manual

CVM-C10

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 81 82

Keine Kommentare

Circutor CVM-C10 Series Bedienungsanleitung Seite 37