Circutor CVM-C10 Series Bedienungsanleitung PDF herunterladen (Seite 57)

4�9�28�1 Modbus protocol

 Transmission speed

The transmission speed of modbus communications is

programmed on this screen.

Press key

for 3 seconds to edit the transmission speed

selection. The prog icon will be displayed on the bottom of the

screen.

Press key

to browse the two options: 9600 or 19200.

To validate the data, press for 3 seconds and the prog icon will disappear from the display.

Press key to access the next programming step.

 Peripheral number

The peripheral number is programmed on this screen.

Press key

for 3 seconds to edit the peripheral number

selection. The prog icon will be displayed on the bottom of the

screen.

To enter or modify the value, press the

key repeatedly,

increasing the value of the ashing digit.

When the desired value is shown on the screen, move onto the next digit by pressing the key

to modify the other values.

If you press the key after changing the last digit, it will jump back to the rst digit so you

can modify the previously programmed values again.

The peripheral number ranges from 0 to 255.

To validate the data, press for 3 seconds and the prog icon will disappear from the display.

Press key to access the next programming step.

 Parity

The type of parity of Modbus communications is selected on this

screen.

Press key

for 3 seconds to edit the parity type selection. The

prog icon will be displayed on the bottom of the screen.

Press key

to browse the options:

no parity

Instruction Manual

CVM-C10

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 81 82

Keine Kommentare

Circutor CVM-C10 Series Bedienungsanleitung Seite 57