Circutor CVMk2 Series Bedienungsanleitung PDF herunterladen (Seite 51)

CVM

CONFIGURATION

Edit the two digits in the equation that correspond to the appropriate alarm(s). Between the two

digits corresponding to the alarm, an "*" or "+" sign can be entered. These correspond to the

AND or OR functions, respectively, and will be applied between the alarms congured.

4.7.2.3. Digital inputs conguration

The card inputs are also congured in two different ways depending on whether the user

desires to congure the input as an incremental counter or a two-state logic input (ON/OFF).

size = 0000

By setting the input size to zero, the input will be congured for ON/OFF input status. When

the input is congured as Boolean, it is not necessary to congure the next menu option, Dec.

pos.

size ≠ 0000

When an input size other than zero is congured, this is congured as an incremental pulse

counter, which can have a maximum counter value of 10M. The value to enter is the multiplier

for each input pulse.

Dec. pos: Indicate the decimal positions that the corresponding input counter should have.

The options available in the lower menu include:

Next(F2). This increases the input number from 1 to a maximum of 08 to access its

conguration. From the 08 input conguration screen, pressing F2 (Next) again

will take the user back to the 01 input conguration screen.

OUT (F1): Press this button to access the alarms conguration screen, Section 4.7.2.1.

To store the modied parameters in memory, press SET and conrm with OK (F4). To exit without

saving changes press ESC (F3).

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 151 152

Keine Kommentare

Circutor CVMk2 Series Bedienungsanleitung Seite 51