Circutor CVMk2 Series Bedienungsanleitung PDF herunterladen (Seite 82)

CVM

CONFIGURATION

To view another measurement module, press the sel (F4) button and access the list of

connected modules. The cursor will be positioned over the rst line, which corresponds with

the rst module congured in the list.

Use the up-down arrow buttons to move the cursor to the desired module. Press SET to enter

the desired value.

On the screen a list will outline all measurement modules that have been congured and

entered on the screen. The list shows the following parameters.

0123456789 abcdefghij YES/NO

0123456789: This is the serial number of the module detected by the screen.

abcdefghij: This is the name congured for this module.

yes/no: This indicates the module selected to view in the screen.

The name of the module selected is displayed on the upper right hand side of the screen. If

another module is selected, the name will change to indicate the measurement module that

corresponds with the values currently displayed at any time.

To view the parameters of another module in the list, navigate to the module using the arrow

buttons. When the cursor is over the desired module, select it by pressing sel (F4) in order to

change the menu option to yes and then conrm with ok.

To change the module that is viewed on the display, choose system from the menu. In system,

access the modules drop down menu and select the list option. Then, conrm with the set

button.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 151 152

Keine Kommentare

Circutor CVMk2 Series Bedienungsanleitung Seite 82