Circutor CVMk2 Series Bedienungsanleitung PDF herunterladen (Seite 90)

CVM

DISPLAY

The buttons that appear on the bottom menu include:

zhx1: This button can be pressed to horizontally zoom in on the waveform displayed.

This is a cyclic zoom with x1, x2 and x4 options, which then returns to normal.

The simple or phase-neutral voltage waveform is displayed on this screen. The up/down arrow

buttons can be used to navigate inside the screen between the L1, L2 and L3 phases.

Upon accessing the screen, the cursor is situated over L1 and is activated by default. To view

the phases, place the cursor over the desired phase and press SET. If the phase selected was

already activated, pressing SET will deactivate it and said phase will no longer be displayed.

Accordingly, the three waveforms on the three phase line can be simultaneously viewed. They

can also be grouped according to preference.

The boxes situated on the right side of the screen, which correspond to each phase, provide

the RMS value of the simple voltage for each one of the phases.

WARNING: Refreshing screens that display graphics such as waveforms and

phasors takes one second. If there is any event that last less than one second

or that is not cyclic, it will not be displayed.

6.1.2.1. Voltage waveform display

On the Min screen, the INST. option appears, which can be used to return to the screen

that displays the instantaneous variables.

scop: Pressing this button will access the screen for the wave form of the voltage between

the phases and neutral.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 151 152

Keine Kommentare

Circutor CVMk2 Series Bedienungsanleitung Seite 90