Circutor CVMk2 Series Bedienungsanleitung PDF herunterladen (Seite 78)

CVM

CONFIGURATION

To modify the current values, press EDIT (F4). The cursor will be positioned in the rst line of

parameters. Use the up-down arrow buttons to move the cursor to the desired parameter. Press

SET to enter edit mode for the desired value.

5.1.2 CLOCK / TEMPERATURE

To congure the internal system clock, go to system in menu. In system, drop down the

preferences menu and select clock/t.

Parameters that can be modied on this screen follow:

contrast: It is possible to change the contrast of the digits displayed on the screen and to

adapt the screen to better suit the lighting in the facility. Values that can

be entered can vary from 00 to 99.

LCD off: Choose between yes and no. If YES is selected, the screen switchs off is

activated to save energy. The screen disconnection time is automatically

congured for 5 minutes.

BACKLIGHT: Enter the time (in seconds) over which the screen backlighting should be

activated. Select on of the following: 10, 90 or 180. It is possible to select On or

Off. If On is selected, backlighting is always on. If Off is selected, backlighting

is always off.

Language: This indicates the system interface language to be used on screens and

menus. It is currently possible to select Spanish, English, French or

German.

To store the modied parameters in memory, press SET and conrm with OK (F4). To exit without

saving changes press ESC (F3).

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 151 152

Keine Kommentare

Circutor CVMk2 Series Bedienungsanleitung Seite 78