Circutor CVMk2 Series Bedienungsanleitung PDF herunterladen (Seite 63)

CVM

CONFIGURATION

You must assign a name and the desired IP address. The IP address must be in the same

address limit than does the computer. This step will fail because they do not nd the device

with the IP that was assigned and display the next screen to request the MAC address of the

card.

You must enter the MAC address of the ethernet card and click accept. The software sends the new IP

address to the expansion card analyzer

Once the card is inserted, continue with its conguration. To do so, select the MENU option from

the upper bar on the display and press SET to access the drop-down menu.

From the three options that appear on the drop-down menu (card 1, card 2 or card 3), count

from the top side of the system to select the position where the expansion card is inserted.

NOTE: If there is no card inserted in the position selected, the message NO CARD will

appear on screen

Conrm the selection with the SET button, and continue with the card conguration.

4.7.4.3. μSD card conguration

4.7.4.4. μSD Card parameters

To view the memory card parameters, enter the MENU, select cards, and navigate to the

corresponding card to see the features.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 151 152

Keine Kommentare

Circutor CVMk2 Series Bedienungsanleitung Seite 63